Current Voltage Capacity Tester USB Volt Current Voltage Doctor Charger Capacity Tester Meter Power Bank

1PCS New version ESP-12F (ESP-12E upgrade) ESP8266... $ 1.65 1PCS New ESP8266 Web Sever serial WiFi expansion b... $ 5.08 OTA WeMos D1 CH340 CH340G WiFi Development Board E... $ 3.42 ESP8266 ESP-12E ESP12E (Replace ESP12 ESP-12) ESP8... $ 1.96 1PC ESP8266 serial WIFI model ESP-03 Authenticity ... $ 3.28 1pcs Upgraded version ESP-01 ESP8266 serial WIFI w... $ 2.05 1PCS ESP-01S ESP8266 serial WIFI Wireless Transcei... $ 1.63 SESP8266 ESP-12 ESP-12F CH340G V2 USB WeMos D1 Mi... $ 2.23 1PCS ESP-12S (ESP-12F upgrade) ESP8266 remote seri... $ 2.08 ESP8266 ESP-07S Updated version Serial WIFI Wirele... $ 2.17

• Description:
• • This test can be a USB charging current, voltage, discharge capacity,Quantity of electric charge,power, timing, intelligent devices.
• •  It can be very easy to find digital device charging problem.
• •  Tester three dimensional size     58*24*13.5MM
•                                                            
• The only button on the tester is used to view and test data switch, The tester can be powered down to save data.
• Specifications:
• 1. Input Voltage: 4V - 30V 
• 2.Input current : 0 - 5A `
• 3.Cumulative capacity range: 0-99999 mah precision: 0.001 Ah
• 4.Charge accumulation scope: 0-999999 MWH precision: 0.001 Wh
• 5.Cumulative power range: 0-299.999W precision: 0.001W
• 6.Timing the maximum range: 0-999 hours 59 minute 59 seconds precision: 1 second
• 7.Parameters that you can test: Voltage of battery. Current of battery, discharge capacity of battery,Quantity of electric charge,power of battery,timing.
• 8.Communication function: Yes
• 9. Parameters adjusting function :Yes. Equipment for parameters adjustment: One electronic load,one constant current  source. Voltage of constant current source should be set to 8.5V 
• There are 3A, 2A, 1A and 0.3A models for current adjusting.
• Here is a example for 3A:
• When you set electronic load at 3A model, the current will be adjusted step by  step.
• It will cost you about 10 seconds and you can see the result changing procedure in the LCD screen.
• When you see the 3A result shown in LCD screen, the  adjustment process is finished. You can shut
• off the electronic load and the  parameters will be saved automatically.
• 10. Clean the data : Push the button until the parameters changed to next sets of  parameters. Then release the button.
• Then the next sets of parameters will be started and they will start from zero.
• 11.  Over voltage or under voltage : Over voltage or under voltage, LCD screen displays a warning symbol and issue rapid beep beep sound.
• 12.  Turn on mode l: The LCD screen will show all parameters within 1s when you connect power supply by Micro USB or male plug of USB with wire.(It is to check whether the LCD screen  is good or not).Then you can see the parameters used last time(capacitor and  which set of parameters). You also can see the current voltage, current and over  voltage or under voltage. Please see following illustration.
• USB output port can be connected to a data line, a discharge resistor or the  like cable devic comprising a data communication function, the data does not affect the data transmission line.
• Test specifications, voltage can not exceed 30V, current can not exceed 5.1A.
• Note:When the voltage is lower than 3V on the instrument display No display screen or higher than 22V,LCD screen displays a warning symbol and issue rapid beep beep sound, it does not affect the use.Application examples
• Because mobile phones and digital devices at low battery or full charge, the  current and voltage is not a stable value,
• the application example of the discharge
• device is a USB 1A or 2A discharge resistor.Note: This data is mobile power discharge capacity, the battery capacity is not, according to our experience, the discharge capacity is about 1.9 times the battery capacity.  
• The former Test Reference Manual Tester discharge capacity value is cleared,and the mobile power is fully charged.

Ensure your order is placed by 2PM to guarantee next-day delivery! Our commitment to prompt service includes a 24-hour delivery system through our network of carriers, aimed at ensuring your package arrives right on schedule.

Please note, a delivery fee of €4.99 applies for orders under €50. For those in remote areas, be aware that our couriers may apply an extra surcharge. This additional fee helps cover the costs of transporting your items to harder-to-reach locations.

Every Tokyo Ltd. product is engineered with precision and built to last. We stand behind the quality of our products, which is why your purchase is backed by a standard 12-month warranty. This warranty covers any manufacturing defects and ensures that your product operates as promised.

Extend Your Coverage

For those who demand even more peace of mind, Tokyo Ltd. offers an Extended Warranty option. By opting for this, you can increase your warranty coverage beyond the standard 12 months. This extension is designed to provide you with additional assurance and support for your Tokyo Ltd. products, ensuring that your investment is protected for even longer.

Register Your Product

To activate your warranty and take the first step towards worry-free ownership, we highly recommend registering your product with us. Product registration not only activates your warranty but also ensures you receive swift and efficient support when needed. It enables us to keep you updated with the latest updates, offers, and technical information related to your purchase.